The TELECAB elevator is manufactured by Savaria Inc. and is a residential two stop elevator. The Telecab maximizes living space and keeps construction to a minimum by eliminating the need for a hoistway.

The Telecab’s modern design suits your environment. It is an economical, attractive and dependable solution, allowing mobility impaired people to move from one floor to another.

  • 500 lb capacity
  • Maximum travel of 16′
  • Travel speed 25 feet/min. approx.
  • Cab dimensions: 30″ x 46″ x 78″
  • 115 VAC relay logic operation (115 VAC up direction and 12 VDC down)
  • Automatic battery recharging system (115 VAC)
  • Low voltage controls
  • 2:1 chain hydraulic drive system
  • Roller guide shoes
  • Keyed call / send stations
  • Continuous pressure directional push buttons
  • Non-skid platform surface
  • Beige or white acrylic urethane paint finish
  • 1/4′ (6 mm) plexiglass windows
  • Front only car access
  • 34″ x 59″ min. floor cutout
  • 90″ minimum overhead at top landing
  • Three pieces modular cab design and 8 ft modular guide rail for easy access on site
  • Time delay for automatic door lock system
  • Conforms to ASME A18.1 and CSA-B613

  • Battery operation in up and down direction
  • 32″ x 54′ cab dimension
  • Front/back access
  • Two doors concept
  • Custom cab dimension
  • Custom color
  • Door closer
  • Remote hand control
  • Door mount or side mount car control station

  • 500 lb capacity
  • Maximum travel of 16′
  • Travel speed 25 feet/min. approx.
  • Cab dimensions: 30″ x 46″ x 78″
  • 115 VAC relay logic operation (115 VAC up direction and 12 VDC down)
  • Automatic battery recharging system (115 VAC)
  • Low voltage controls
  • 2:1 chain hydraulic drive system
  • Roller guide shoes
  • Keyed call / send stations
  • Continuous pressure directional push buttons
  • Non-skid platform surface
  • Beige or white acrylic urethane paint finish
  • 1/4′ (6 mm) plexiglass windows
  • Front only car access
  • 34″ x 59″ min. floor cutout
  • 90″ minimum overhead at top landing
  • Three pieces modular cab design and 8 ft modular guide rail for easy access on site
  • Time delay for automatic door lock system
  • Conforms to ASME A18.1 and CSA-B613
  • Adjustable top floor presence detector built into the cab
  • Electro-mechanical door lock and open door sensor
  • Under panel safety sensor
  • Emergency stop and alarm
  • Emergency battery lowering
  • Emergency lowering
  • Fully enclosed drive tower for safety and aesthetics
  • Pressure relief valve to prevent platform overload
  • Slack chain safety device
  • Telephone in cab
  • Halogen light in cab